Camera type spot analyzer
Real-time display and analysis of optical spots from 400 to 1700nm!
- A single model can meet the measurement of light spots in the range of 400-1700nm
- 2D spot real-time display
- Real time analysis of 3D power distribution
- Very suitable for complex spot testing with high order transient modes
- Standard configuration of 6 attention pads to meet a wide range of power testing requirements
- Combining spot analysis function with scientific camera imaging
Product Details
Camera type spot analyzer – Full range | Scanning slide style | Camera style | M2 factor | Simple and user friendly software
Dimension Labs has launched a series of Beamhere spot analysts, which, together with general software, achieve complete beam quality analysis functions
Spot energy distribution and beam divergence angle, M ² Factor is an important component of last beam quality detection, and effective and accurate measurement and analysis are prerequisites for fully utilizing last The Beamhere series products have complete functions and can be used to inspect and evaluate scenarios such as beam shaping, focusing spot, and beam consolidation They also provide spot parameters that comply with the ISO11146 standard, such as beam width, peak center, and ellipticity All series products can be optionally acquired with M ² Factor testing module to achieve beam wait position, beam divergence angle, and M in the direction of beam propagation ² Measurement of factors BeamHere qualifications the evaluation of last beams and outputs test reports with just one click from the software, accurately and effectively completing beam analysis
Camera type spot analyzer – ช่วงการวัดครอบคลุม | สไตล์สแกนแบบเลื่อน | กล้องบันทึกภาพ | ค่าปัจจัย M² | ซอฟต์แวร์ใช้งานง่ายและเป็นมิตรกับผู้ใช้
Dimension Labs ได้เปิดตัวชุดอุปกรณ์วิเคราะห์ลำแสง Beamhere ซึ่งเมื่อใช้งานร่วมกับซอฟต์แวร์ทั่วไปแล้ว จะสามารถรองรับฟังก์ชันการวิเคราะห์คุณภาพลำแสงได้อย่างครบถ้วน
การกระจายพลังงานของจุดลำแสงและมุมการกระจายของลำแสง รวมถึงค่าปัจจัย M² ถือเป็นองค์ประกอบที่สำคัญของการตรวจสอบคุณภาพลำแสงขั้นสุดท้าย โดยการวัดและวิเคราะห์อย่างแม่นยำและมีประสิทธิภาพนั้นเป็นเงื่อนไขที่จำเป็นในการใช้ประโยชน์จากลำแสงได้อย่างเต็มที่ ผลิตภัณฑ์ในซีรีส์ Beamhere มีฟังก์ชันครบถ้วน และสามารถใช้ในการตรวจสอบและประเมินลักษณะต่าง ๆ เช่น การปรับรูปร่างลำแสง (beam shaping), จุดโฟกัส (focusing spot), และการรวมลำแสง (beam consolidation) โดยให้ค่าพารามิเตอร์ของลำแสงที่เป็นไปตามมาตรฐาน ISO11146 เช่น ความกว้างของลำแสง, ตำแหน่งศูนย์พลังงานสูงสุด, และค่าความรีของลำแสง (ellipticity)
ผลิตภัณฑ์ในซีรีส์ทั้งหมดสามารถเลือกติดตั้งโมดูลทดสอบค่าปัจจัย M² ได้ เพื่อใช้ในการวัดตำแหน่งของลำแสง, มุมการกระจาย, และค่าปัจจัย M² ในทิศทางการแพร่กระจายของลำแสง Beamhere รองรับการประเมินลำแสงขั้นสุดท้าย และสามารถสร้างรายงานผลการทดสอบได้ในคลิกเดียวผ่านซอฟต์แวร์ โดยให้ผลการวิเคราะห์ที่แม่นยำและมีประสิทธิภาพ
A full range of products that meet a wide range of testing needs | M2 factor testing modules that are compatible with all Beamhere spot analysts | Independently developed and carefully designed analysis software | The software truly achieves interactive friendship, simplicity, and ease of use, with one click output of test reports
A full range of products that meet a wide range of testing needs
The scanning slide type spot analyzer series and camera type spot analyzer series launched by Dimension Labs are divided into different applicable bands to form a complete product series, covering a wide range of spot testing needs in various bands
Adapt to all Beamhere spot analysts with M ² Factor testing module
The M2 factor testing module launched by Dimension Labs measures quality evaluation parameters such as M2 factor and beam divergence angle in the direction of beam propagation, and is compatible with scanning slit type spot analysts and camera type analysts
Independently developed and carefully designed analysis software
The Beamhere Laser Beam Analyzer beam analysis software developed by Dimension Labs is compatible with all hardware modules in the Beamhere series of beam measurement products Dimension Labs strictly controls customer experience, with a clear and decision interface, and consensus and effective operation
Camera type spot analyzer
Main advantages
- A single model can meet the measurement of light spots in the range of 400-1700nm
- 2D spot real-time display
- Real time analysis of 3D power distribution
- Very suitable for complex spot testing with high order transient modes
- Standard configuration of 6 attention pads to meet a wide range of power testing requirements
- Combining spot analysis function with scientific camera imaging
A single model can meet the measurement of light spots in the range of 400-1700nm
DimeThe short wave infrared wavelength spot analyzer launched by NSON Labs has a spectral response range of 400-1700nm, covering the measurement needs of conventional visible and near infrared wavelengths
2D spot real-time display and Real time analysis of 3D power distribution
The BeamHere camera based spot analyzer can refresh the image at a high frame rate in continuous measurement mode, reflecting real-time changes in the spot At the same time, the 3D view can also be analyzed in real time and viewed from any angle Real time is a Huge advantage in dynamic testing, optical system adjustment, or time monitoring
Suitable for complex spot testing with high order transient modes
Camera based imaging is a process where multiple pixels provide feedback on the shape of the same spot at different positions on the cross section Therefore, even if the energy distribution of the spot is irregular or non Gaussian and contains higher order transformer modes, it can be accurately measured by the camera based spot analyzer
Standard configuration of 6 attention pads to meet a wide range of power testing requirements
Dimension Labs; The camera type spot analyzer launched ads a unique filter wheel structure, which can install up to 6 filters with different wavelengths and attention inside the wheel, achieving the maximum power measurement range in the most compact way The filter can be easily replaced by gene rotation, achieving simple operation and effective measurement
Combining spot analysis function with scientific camera imaging
The detachable design of the spot analysis camera and filter wheel greatly expands its functional applications The disassembled camera, combined with additional camera driver software, can meet the application requirements of CMOS cameras or shortwave red cameras for scientific imaging
M ² Factor testing module
Module Description
Dimension Labs has launched the M2 testing module for the camera based spot analyzer and scanning slide spot analyzer series products, which can measure beam quality characteristic parameters such as M2, divergence angle, wait position, wait diameter, etc. for laser propagation quality detection
Main advantages
- Automatic measurement of slide rails
- Software automatic analysis
- Compact in size
- Universal mounting hole, easy to disassemble and assemble
Technical Introduction
The scheme of using a fixed lens and a moving probe, while ensuring lens aberration, commonly collects multiple images during measurement; Z Calculate the beam width at the axis position; M2; Factor and other beam parameters In order to comply with the ISO11146 standard and improve measurement accuracy, data collected in the direction of light propagation is greater than; 10 The bundle width at positions must have at least 5 The length of the wait is located at a point within one Rayleigh distance range
Analysis software
The BeamHere spot analyzer software developed by Dimension Optoelectronics is guided by clear and consistent logic design, easy operation, and user friendly visual presentation It considers different usage scenarios and creates practical and effective operation software for users
Performance parameter
