-
- Simultaneous measurement of birefringence magnitude and angle
- High speed measurement (150Hz)
- High resolution
- High sensitivity in low-level birefringence measurement
- Modular design for moving head
- Customizable light source based on application
- Versatile use (i.e. glass, semiconductor, wave plates, visible, infrared materials)
-
- Fiber tracing & fiber cable identification
- Audio-Visual detection of target fiber/cable
- Zero dead zone
- Traces ‘bend insensitive fibers’
- Dynamic range : 9 dB
- Output power selection (-25dBm ~ -4dBm)
- Optical Power Meter function
- Visual Fault Locator function
- Battery operation
-
- High output power: up to 23dB
- Stable spectral output power
- Wide wavelength range (C,L,C+L band)
- Isolated output
- RS232 remote interface
- Easy operation
- Compact size
- Flattened output
-
- Wide dynamic range for PER measurement up to 50dB
- Wide input power range: -40dBm ~ +10dBm
- Wide wavelength range: 1260 ~ 1640nm
- Minimum PER holding function
- Relative power monitoring function
- Channel: One or Two Channels(Optional)
- GPIB / RS232 remote interface
-
- Fiber tracing & fiber cable identification
- Audio-Visual detection of target fiber/cable
- Total length of the target fiber/cable
- Distance to event location
- Traces bend insensitive fibers
- Wide dynamic range : 13dB (one pass loss)
- Visual Fault Locator function
- Battery operation
-
- Direct and instantaenous filter control
- Accurate tuning of center frequency, phase, and attenuation level
- Allows multiple center frequencies to be set directly over the entire band
- Programming available through GUI
- Reliable all-LC design with no moving parts
- Low insertion loss, low PDL, and high isolation, with very steep filter shapes
-
- Incoherent light source for Test & Measurement
- High wavelength accuracy
- Total output power : Max. 20dBm
- Three forms of outputs
- Single wavelength incoherent light output : 50GHz & 100GHz
- Comb source at ITU grid with spacing 25GHz, 50GHz &100 GHz
- Super Flat broadband source < 0.5 dB
- Output power level control
- USB remote interface
- Simple and easy operation
-
- High Sensitivity : 0.5mV/fs
- High Resolution : 0.1 fs
- Ultra Low Timing Jitter : < 7 fs
- Super Wide Locking Bandwidth : > 2,000kHz
- Ultra Low SSB Phase Noise : ~-150 dBc/Hz
- USB remote interface
-
- All optical fiber configuration : Low Loss (lL : ~ 1.0 dB typ. PDL : ~ 0.1 dB typ.)
- Customized DGD configuration and PMD range : for 10G, 40G applications, etc.
- High repeatability and stability
- All order PMD emulation : Independent generation of 1st order PMD (DGD), 2nd order PMD (SOPMD), Higher order PMD
- Maxwellian distribution of PMD
- Variable mean DGD : Tunable statistics
- Dynamic emulation speed control
- Powerful GUI : Deterministic Statistic Emulation, Virtual (trial) DGD mode, Manual Tuning
- Easy expansion (Cascading mode. PM fiber option)
- Various customized options
-
- Acquires PDL and IL measurements simultaneousty
- The fastest measurement speed (0.01 sec./point Max.)
- Polarization scanning method (All-states method)
- No calibration needed
- Not sensitive to fiber lead movement
- Two output channels
- Optical power meter function
- External trigger function
- GPIB, RS232 and TCP/IP
-
- 3 kinds of modules
- 4ch optical power meter module
- 2ch optical power + 2ch analog output module
- 4ch current meter module
- Max. 20 channels of precision optical power measurement
- Optical power range : -80 to +10 dBm
- Single mode & Multimode measurement
- Fast measurement (Max. 100 kHz) with high resolution
- Wide wavelength range
- Data logging capability of 1,000,000 measurement points/ch
- Varieties of interfaces (GPIB, TCP/IP, RS232)
- External Trigger in : TTL Level
- Free space connector type (FC)
-
- High speed scrambling
- All single mode fiber configuration
- Input polarization independent
- Wide operating wavelength range: > 40nm
- Low loss: < 0.7 dB typical
- Low PMD: < 0.2 ps typical
- GPIB & RS232 remote interface
- Plug & Play
-
- Portable and compact size
- Reliable accuracy and repeatability
- Broad measurement range of 50um to 10mm
- Non-contact measurement
- High speed measurement (~1kHz)
- No calibration needed
- User friendly operating program
- Available for OEM business and system integration
-
- Compact designable size
- Up to 6
- High accuracy & repeatability
- No calibration needed
- User friendly operation program (LTV, 3D)
- High speed measurement (500Hz for Warp / 1kHz for Thickness)
- Thickness / Warp / Bow / LTV / TTV / Stress measurement
End of content
End of content
